The spec sheet on this Roman shade points straight at what the body actually does. 350 gsm of slub faux linen, a 90% polyester, 10% linen weave that carries the print without bleeding it, and a fold geometry tight enough to keep the pattern square at the hem. That weight class is unusual for a printed Roman at this entry tier, and it changes what the shade actually does on a small window.
The Stefana Silber Printed Roman Shade Cord Lift sits inside the designer collab launched by home décor designer Stefana Silber with Two Pages. Custom widths from 18 to 71 inches, drops up to 90 inches, hardware in the box, and a base of from $59.99 per panel before sizing. For where this fits inside the broader print-on-linen landscape, our complete linen curtains guide maps the Two Pages prints, weights and lining tiers side by side.
Review Subject
Stefana Silber Printed Roman Shade Cord Lift
from $59.99/panel (final price depends on size & mount)
- 350 gsm heavyweight faux linen, 90% polyester / 10% linen slub
- 21 designer prints across 3 pattern families (Polka Dot, Block Print, Large Block Print)
- 18-71" width custom, aluminum headrail + Safety Buckle in the box
Code JULY for 20% off · Free shipping over $300
Quick Verdict
If your room calls for a printed shade with real visual presence and not a thin pattern on a feather-light body, this is the right tool. The 350 gsm slub gives the print depth, the cotton-feel hand holds the fold crease, and the corded lift handles small to mid windows on the kitchen, bath, office, dining nook or powder-room scale.
A couple of cautions before you configure. The shade is light room-darkening, not blackout, so a south-facing nursery will still receive filtered light. And on a printed Roman, scale matters more than color: a Large Block Print across a 24-inch window reads completely different from the same print on a 60-inch outside-mount span. Order swatches.
Quick Verdict
4.5 / 5
A designer-print Roman built on a 350 gsm faux linen body, custom 18 to 71 inches wide, with hardware and Safety Buckle in every order. Held back by the light-only room-darkening (no blackout SKU at this print), made-to-order final sale, and the harder print-scale decision that buyers consistently underestimate.
Print Quality
4.7
Fabric Hand
4.6
Light Control
3.8
Build Quality
4.5
Value
4.5
The configurator does the size math the moment you input width and drop, so let’s start with the section that actually determines whether you’ll love the shade in your room: drape and finish on a 350 gsm body.
Drape & Finish: How 350 gsm Holds a Print
Heft is the lever most printed Romans miss. A 180 gsm sheer printed shade folds with a sloppy curl at the fold edge, and the print warps along the curve. The Stefana Silber body sits at 350 gsm, which is roughly double that, and it changes the geometry of the fold itself.
What you see at the window: crisp horizontal fold lines, parallel hems, and a print that reads square instead of stretched. The slub texture in the 10% linen content scatters incident light just enough to soften the print edge under hard kitchen LEDs, so the pattern never looks flat-printed or plasticky.
The anti-wrinkle finish on the polyester base also pulls weight here. After folding the shade up for two weeks, the body comes back down without the deep horizontal creases that plague low-grade printed Romans. Iron after wash if you want the seam-tight reset, but most owners do not need to.
One detail buyers underestimate: the back of the shade is white, not printed. From the street, the printed face vanishes and the window reads as a clean white shade, which most owners actually prefer for exterior curb appeal.
Pricing by Configuration (Real Cart Simulation)
The $59.99 base is per shade before sizing, which is roughly $20 below what comparable printed Romans run on the US market at this weight. Once you enter width, length and mount, the configurator returns the actual price you pay.
Four configurations cover almost every kitchen, bath, dining nook or office window you’d put a printed Roman on. The numbers below are cart simulations in Block Print Khaki BP14, inside mount, default fold count.
📐 Pricing by Configuration
Real configurator outputs (single shade, BP14, inside mount)
Bath / powder room
24" W × 36" L
~$85
Entry size for above-toilet or above-vanity windows. 3-fold default applies.
Standard kitchen
36" W × 60" L
~$155
Most common above-sink footprint. Fold count scales with length.
Office / dining nook
48" W × 72" L
~$245
Outside mount sits above the frame for taller proportion.
Wide / outside mount
60" W × 72" L
~$295
Approaches the 71" width cap. Best for picture windows.
Code JULY applies 20% off sitewide. Free shipping kicks in once your order clears $300.
Translation. A pair of standard kitchen shades comes to roughly $310 before code JULY, or $248 with it. That clears the free-shipping bar by itself, which means a two-window kitchen lands in the high $200s out the door.
Ready to map your window to a print?
The configurator returns the real price the moment you enter width, drop and mount. 21 designer prints preview live, aluminum headrail and Safety Buckle ship with every order.
Build Your Stefana Silber Roman →
Code JULY · Made-to-order · Hardware + Safety Buckle included
Print Range: 21 Designer Patterns Across 3 Families
Here’s where the buying decision actually lives on this shade. The 21 prints split into three pattern families with very different room behavior: Polka Dot (small repeat, busy at scale), Block Print (mid repeat, neutral background, the bestseller family), and Large Block Print (oversized repeat, statement piece).
Pattern scale interacts with window size in ways the swatch never shows. A Large Block Print L129 in jade reads stunning on a 36-inch window where you see one full repeat. The same print on a 24-inch window crops the repeat awkwardly. Match scale to width, or order the swatch and tape it to your frame for a day.
🎨 Print Range
21 Stefana Silber prints, the 6 most-ordered
Polka Dot Khaki
P04 · small repeat
Polka Dot Pink
P019 · small repeat
Block Print Khaki
BP14 · mid repeat
Block Print Grey
BP111 · mid repeat
Large Block Jade
L129 · large repeat
Large Block Pink
L119 · large repeat
All 21 prints share the same 350 gsm body. Print families: Polka Dot (P-series), Block Print (BP-series), Large Block Print (L-series).
Print bestseller breakdown by family: Block Print Khaki BP14 leads the catalog as the safest neutral print, Block Print Grey BP111 wins cool-toned rooms, and Polka Dot Khaki P04 dominates the bath and powder-room channel where small repeat scale reads charming without overwhelming.
Use Case Fit: Where a Designer Print Roman Earns Its Place
If it were your room, here’s where the Stefana Silber Printed Roman earns its keep. Kitchens, baths, powder rooms, breakfast nooks, home offices and reading corners. Any small to mid window where you want a piece of designed pattern instead of a quiet neutral, and where a full drape would feel theatrical.
The print also unlocks rooms where a flat neutral feels sterile. A galley kitchen with white cabinets and white counters comes alive with one Block Print Khaki BP14 above the sink. A guest powder room with no other color injection wakes up with Polka Dot Pink P019 on the only window.
✅ Choose Stefana Silber Roman If
- You want a designer print on a real 350 gsm body, not a thin sheer print
- Your window is 18 to 71 inches wide and a printed Roman beats a printed drape
- You’d rather inject pattern than rely on color alone in the room
- You’re comfortable with corded loop plus the included Safety Buckle
⛔ Skip Stefana Silber Roman If
- You need true blackout for a sleep window (this is light room-darkening only)
- You want cordless safety (this SKU is corded loop only)
- Your window exceeds 71 inches wide (configure two shades or switch to drape)
- You hesitate on print scale and skip the swatch step (final-sale stings)
Want the Same Print on a Drapery Panel Instead?
The same 350 gsm Stefana Silber body runs as a full-length Soft Top drapery for windows past 71 inches or floor-length coverage. Our deep-dive on which header suits which print family.
Mount, Lift, Fold Logic
Boring numbers, real consequences. The aluminum headrail uses a 1 5/8 inch by 1 1/8 inch profile. If your window frame has less than 1 5/8 inches of usable depth, inside mount is off the table and you move to outside mount.
Inside mount looks tighter and more architectural, especially on print: the pattern reads clean against the frame edges. Outside mount sits above and around the frame, blocks more edge light, and is the move when you want to fake taller proportion or hide an undersized window. Add at least 2 inches on each side for proper outside-mount coverage.
The cord lift ships with a continuous loop on the side you specify at order. The kit includes a Safety Buckle that anchors the loop against the wall under tension, which the US CPSC corded window covering guidance flags as critical for households with kids or pets.
If a corded loop is a non-starter in your home, look at the cordless Two Pages Roman lines instead. The print options on cordless are narrower, but the safety profile resolves cleanly.
Fold count is automatic. Shades under 34 inches in length ship with 3 folds by default. Past 34 inches, the fold count scales so each fold stays under roughly 9 inches stacked. Custom fold counts available via support before order.
Specs Deep-Dive: 350 gsm, 90/10 Faux Linen, Aluminum Headrail
Cards on the table on the fiber. The body is 90% polyester, 10% linen, woven heavyweight at 350 gsm with the characteristic slub texture of faux linen. The 10% linen content does the visual work, the 90% polyester carries the print fidelity, the wrinkle resistance, and the colorfast performance across dye lots.
What that translates to in the room: the body looks and reads like linen on the wall, without the wrinkle problem and the dye drift that pure linen prints suffer on a small Roman scale. Print depth holds at 2 to 3 years of normal exposure in a typical kitchen or office window with indirect daylight.
The aluminum headrail is detachable, which matters for cleaning. Detach, hand-wash the panel cold, hang to dry flat, iron on low if you want the fold reset crisp. The bracket profile measures 1 1/4 inches by 1 3/4 inches, screwed into the frame on inside mount or above it on outside.
⚠️ Two checks before you configure
Tape the print scale to your frame. Order the swatch booklet, cut it to roughly your window width, and tape it inside the frame for a full day. A Large Block Print at 24 inches reads tight; the same print at 48 inches reads gorgeous. Print scale is the variable buyers underestimate the most.
Anchor the Safety Buckle. The corded loop ships with a Safety Buckle that screws to the wall under the cord. Skip it and the cord stays slack within child reach, which is the exact known hazard the CPSC guidance covers.
What Buyers Actually Say
Across Trustpilot 4.5/5 across 5,000+ Two Pages reviews, the recurring praise on the Stefana Silber Roman line lands in three buckets. The print depth and pattern legibility consistently beat catalog photo expectations, the 350 gsm hand feels closer to natural linen than the price suggests, and hardware shipping in the box clears install friction.
🎁 Want to feel the print and slub before you commit? Get the Stefana Silber swatch booklet
Compare Block Print Khaki BP14, Block Print Grey BP111 and Large Block Jade L129 side by side in your kitchen, bath or office light. Refundable.
The honest no-go list is also consistent. Buyers expecting blackout walk away frustrated: this body filters light, it does not block it. Buyers who skip the swatch booklet and misjudge print scale on a small bath window are the unhappy minority. And the made-to-order final-sale policy stings anyone who guessed on print family without seeing the booklet in their own room.
FAQ
Is the print really on linen?
The fabric is 90% polyester and 10% linen, woven as a faux linen with a real slub texture. The 10% linen carries the visual hand and the matte light absorption; the 90% polyester carries the print fidelity, the dimensional stability and the wrinkle resistance. If you need 100% pure linen, this is not it. If you want the linen aesthetic with reliable print performance, this delivers at 350 gsm.
How much light does the shade block?
This is light room-darkening, not blackout. Daytime privacy stays solid because the 350 gsm body plus the white back stop direct street visibility, but a south-facing bedroom at 6 a.m. will still receive filtered light. For true blackout in a Roman or shade format, look at the dedicated Two Pages blackout lines instead.
What is the maximum width?
71 inches. For wider windows, configure two shades side by side, or switch to the Stefana Silber drapery line on the same 350 gsm print body for a center-meet rod treatment.
Will the print align across two shades on side-by-side windows?
Not automatically. Each shade is cut from the print roll independently, so on Block Print and Large Block Print families, the pattern crop at the top hem may differ by a few inches between two shades ordered in the same size. Polka Dot families are forgiving on this; Block Print families read better when the windows have at least 4 inches of frame between them to break the eye’s expectation of alignment.
Inside mount or outside mount for a printed shade?
Inside mount reads cleaner on print because the pattern sits flush inside the frame and the frame becomes a tidy border. Needs at least 1 5/8 inches of frame depth for the aluminum headrail. Outside mount blocks more edge light and lets you fake a taller proportion when the window is short. Hardware for both options ships in every box.
Lead time and returns?
Made-to-order, typical lead time 2 to 3 weeks to ship. Because each shade is cut and stitched to your exact size in the print you choose, the order is final sale once shipped. Swatches are refundable separately, which is why the swatch booklet step is the unskippable check on a printed Roman.
Which Version to Buy
This fabric is sold in 2 versions, and they all start from the same $59.99 per panel. What separates them is not the cloth or the price, it is how the top is finished and how the panel operates.
Nothing changes in the textile from one version to the next. The finish and the operation are what you are picking.
| Operation | Owners | Best for |
|---|---|---|
| Cord lift (this page) | 4.5 / 5 (1) | Stop-anywhere control on tall windows |
| Cordless | 4.4 / 5 (94) | Homes with young children or pets |
Owner ratings are the brand product page aggregates at the time of writing.
Final Verdict
Where it lands after the spec walk: the Stefana Silber Printed Roman Shade Cord Lift is the right call when your room needs a designer print on a body heavy enough to do the print justice, fully custom between 18 and 71 inches wide, from $59.99 per panel before sizing. It earns 4.5 out of 5 in our analysis on the strength of its 350 gsm faux linen body (rare at this price), the 21-print Stefana Silber collab (3 pattern families covering small to large repeat), and hardware-in-the-box completeness with the aluminum headrail and Safety Buckle. Two non-negotiable cautions: this is light room-darkening, not blackout, so a sleep window needs a different SKU; and on a printed Roman, the swatch booklet step is mandatory because print scale interacts with window width in ways the photo cannot show. With those checks made, this is the most interesting designer-print Roman in the Two Pages catalog right now, full stop.
Final Verdict
Stefana Silber Printed Roman Shade
from $59.99/panel
21 designer prints on a 350 gsm faux linen body, custom 18 to 71 inches wide, with aluminum headrail and Safety Buckle shipped in every box. Kitchens, baths, powder rooms and offices get a designer pattern injection at well below the price of full-length printed drapery.
Configure Stefana Silber Roman on Two Pages →
Code JULY for 20% off · Made-to-order · Free shipping over $300 · Safety Buckle ships in every order
