Liz Linen Blackout Pleated vs Atlanta Room Divider Blackout: Which to Buy?

On paper, both products advertise 99% blackout in the Two Pages catalog. The configurator, the included hardware, and the pricing per linear foot dismantle the equivalence within thirty seconds of comparison.

The TWOPAGES Liz Linen Blackout Curtains Pleated Drapery is a made-to-order pinch pleat drapery, 350 gsm slub linen-blend face with a built-in 220 gsm blackout lining, descending from the OEKO-TEX heritage Liz collection. The TWOPAGES Atlanta Room Divider Blackout Curtain with Ceiling Track Kit is a ready-made grommet curtain bundled with an aluminum ceiling track kit, 252 gsm polyester single layer, sold in six Series A sizes and six Series B sizes. Same blackout rating. Two different product categories. The compatibility question begins by asking whether the target is a window or an open span.

The analysis ahead reads the Two Pages feed, the configurator outputs, the bundled hardware spec, the catalog colorways for each side, and the use cases the two products were actually engineered for. For the standalone deep-dive Liz Linen Blackout pleated drapery review, including configured pricing tiers and the 220 gsm built-in lining behavior, the companion piece lives in the reviews hub.

Quick Side-by-Side: Same Blackout Claim, Different Product Categories

Before the decision-axis sections, here is the recap of 10 spec lines on a single grid. It frames every paragraph below.

The reading of that grid hinges on three takeaways. First, the built-in lining on Liz means no Blackout Thermal upcharge at configurator step, while Atlanta delivers its blackout through a denser single layer. Second, the hardware bundle on Atlanta includes the ceiling track kit at no separate line item, while Liz is sold curtain only. Third, the unit of sale differs: Liz prices per panel, Atlanta prices per set. Both products are OEKO-TEX STANDARD 100 by collection heritage on the Liz side, with no explicit certification flag on the Atlanta feed line.

When Liz Linen Blackout Wins

The answer is Liz Linen Blackout the moment the goal is a window. The pinch pleat header tailors a vertical drop against a casing, the slub linen-blend face reads textured rather than flat polyester, and the built-in 220 gsm blackout lining means the bedroom darkens at 6am without a separate Blackout Thermal upcharge at the configurator. The collection ships in 9 colorways, from Snow White 1908-0 through Taupe Grey 1908-8, all sized to order on a 10 to 12 business day production window.

Bedroom blackout is not a vanity feature. Independent research on light exposure and sleep quality consistently flags pre-dawn light leakage as a fragmentation driver, and the Liz Linen Blackout two-layer assembly is engineered to seal the edge of the panel against the frame when ironed flat. The slub face also avoids the plastic sheen that flat polyester blackouts read as in daylight. Texture matters when the curtain doubles as the room’s largest visual surface from morning to evening.

Header flexibility is the second reason Liz wins on windows. Pinch pleat is the default, but the configurator opens 9 styles in total: Pinch, Tailor, French, Triple, Goblet, Inverted Box, Tab Top, Rod Pocket, Grommet. The same fabric and built-in lining route through any of them with a small surcharge on the formal pleats. Buyers wanting a more flexible header on a linen-blend blackout panel can compare against the Jawara multiway 4-in-1 header blackout collection, which uses a single hardware swap to switch among grommet, pinch pleat, rod pocket, and tab top.

When Atlanta Room Divider Wins

The answer flips to Atlanta Room Divider Blackout the moment the goal is an open span. Studio apartment partitions, basement separations, home office screens, closet-door substitutes, and bedroom alcove enclosures all sit outside the window-framing frame Liz was engineered for. Atlanta solves them with a 252 gsm polyester curtain plus a bundled aluminum ceiling track kit, sold as a single set price starting at $200.99. The 1.6 inch grommets are pre-installed and sized for the kit roller hooks; the aluminum track ships separately from the curtain, in a foam-shaped box with end caps, end hooks, screws, roller hooks, and a saw for cut-to-length adjustment.

The size matrix is the second reason Atlanta wins on partitions. Six Series A sizes cover an 8 ft ceiling height, from Small A (3 to 4.5 ft span, 5’×8′ curtain, 1.9 lbs) up to XXX-Large A (14 to 18 ft span, 2× 9.5’×8′ double curtain, 7.5 lbs). Series B mirrors the matrix at an 8.5 ft height for slightly taller rooms. Each kit ships with the right number of track sections, roller hooks, connectors, and screws for the size band, so the buyer never has to count hardware piece by piece.

Sound dampening is the third reason Atlanta wins on partitions. The 252 gsm dense polyester weave attenuates conversation between zones in a studio apartment or home office, a property the Liz Linen Blackout slub face is not engineered for. Multi-use scenarios pile up fast: basement family room separation, walk-in closet door replacement, guest sleeping alcove enclosure, photo studio backdrop. None of these are window jobs, all of them benefit from the ceiling track plus dense curtain combo.

When Neither Is the Right Answer

A handful of hybrid scenarios land outside both products. The buyer who wants a pinch pleat aesthetic on a ceiling track (no window casing, but full drapery look) needs to configure a Liz Linen Drape Pleated panel separately, then order ceiling-mount hardware from a different SKU. The buyer who wants true 100% blackout without any linen texture belongs on a smoother polyester face product where the surface itself is the blackout layer, not a blend.

Premium home theater is the other case. Both products in this comparison deliver 99% blackout, but neither stacks pile absorption on top of blackout lining, which is the combination cinemas, mastering studios, and high-end media rooms ask for. Velvet does that natively. A Birkin Velvet Blackout Theater panel doubles the sound dampening of a single dense layer and adds a cinematic mood neither Liz nor Atlanta is engineered to deliver.

Finally, the transitional living room that wants daylight preservation rather than total blackout is a poor fit for either product. A Cotton-lined Liz Linen Drape Pleated (non-blackout) on its standard SKU is the catalog-aligned answer there. Both products in this comparison are blackout-by-design, not light-filter products.

Pricing by Configuration Compared

Base units differ in a way that confuses cart math at first glance. Liz Linen Blackout lists at $59.99 per panel, which for a typical window install means two panels minimum, base $119.98 before sizing surcharges. Atlanta lists at $200.99 per set, bundled curtain plus track kit, single SKU at checkout. Code JULY applies 20% sitewide to both. The Liz product page may also display a native BLACKOUT code at 22% off; for editorial consistency the recommendation below uses JULY across the cart.

The Liz curve scales with width and length on a familiar pleat-drapery slope: $185 standard, $295 living, $425 bedroom. The built-in lining means there is no Blackout Thermal $30 to $60 upcharge step that a separately-lined panel would trigger. Free shipping unlocks at Living and Bedroom configurations.

The Atlanta curve is flatter and bundle-driven: $200.99 studio corner, $245 home office, $310 open studio. Sound dampening, the saw, the screws, the roller hooks, and the end caps are all included in the set price, so the buyer is not shopping for partition hardware on a separate trip. The cart math on Atlanta also includes the track kit shipping logistics, which Two Pages handles as a separate parcel from the curtain.

Lead Time, Shipping & Service

Both products list a 10 to 12 business day lead time on the made-to-order side. Liz Linen Blackout is made-to-order in full: face fabric cut to width, lining sewn in, pleat header tailored to the configured size. Atlanta is partially made-to-order: the curtain itself is sewn to the chosen Series A or B size, while the aluminum track kit ships from ready stock as a separate parcel.

Returns policy diverges accordingly. Liz Linen Blackout is final-sale once production starts, the made-to-order norm across the Two Pages catalog. Atlanta is final-sale on the curtain panel for the same reason, while the track kit components may have a separate hardware return window since they ship from stock. The aggregate Trustpilot rating across 5,000+ Two Pages reviews sits comfortably above the affiliate brand average for both made-to-order drapery and ready-stock hardware lines.

FAQ

Is Liz Linen Blackout Pleated truly blackout, or just light-dimming?

The catalog declares 99% blackout on the Liz Linen Blackout Pleated Drapery, achieved by combining a 350 gsm linen-blend slub face with a built-in 220 gsm blackout lining. Owners report nursery-grade darkness with proper width overlap and a wand-return install. The 1% residual is window-edge bleed, which puddle length or a return-to-wall mount eliminates. Unlike a separate lining accessory, the blackout layer is sewn-in, so no Blackout Thermal upcharge applies at the configurator step.

What does the Atlanta Room Divider set include exactly, and what is the final price?

The Atlanta set bundles the blackout curtain (252 gsm polyester, grommet header pre-installed) plus the aluminum ceiling track kit (1 1/8″ W × 1″ H, pre-drilled, flush mount), end caps, end hooks, screws, roller hooks, and a saw for cut-to-length adjustment. Base set price starts at $200.99. Size Series A 8 ft (Small to XXX-Large) covers 3 ft to 18 ft span widths. Code JULY applies 20% off sitewide and free shipping unlocks above $300 cart value.

Can I install Atlanta Room Divider on a window instead of a ceiling track?

The Atlanta header is a grommet sized at 1.6 inch inner diameter, optimized for the kit roller hooks running on the aluminum ceiling track. A 1.25 inch curtain rod fits the grommet, so technically yes, the panel can hang from a rod. The trade-off is that the included ceiling track kit becomes redundant, and a single 252 gsm polyester panel without pinch pleat fullness reads flat rather than tailored on a window. For window framing, Liz Linen Blackout Pleated is the catalog-aligned answer.

What is the actual blackout difference between Liz Linen and Atlanta when both claim 99%?

Both products land at 99% advertised shading rate. The construction difference is what matters at the edges. Liz Linen Blackout is a two-layer assembly (slub face plus built-in lining), so the lining can be ironed flat against the window frame for a tight light seal. Atlanta is a single-layer dense polyester, lighter at 252 gsm vs Liz total 350 gsm plus 220 gsm, and reads brighter at the side hem when used as a window curtain. For absolute bedroom darkness, Liz wins on edge seal. For partition blackout where light bleed sideways does not matter, Atlanta is sufficient.

Which one is cheaper for a 100 inch wide opening?

Depends on usage. For a 100″ wide bedroom window, Liz Linen Blackout configured at 100″ × 108″ pinch pleat lands near $425 per panel × 2 panels = $850 total. For a 100″ wide open studio span, Atlanta XL Series A (9 to 12 ft fits, 12.5’×8′ curtain) lands near $310 per set. Atlanta wins on raw price when ceiling track is the goal. Liz wins on price per window when only one panel pair is needed and the install is window framing.

Are both products eligible for the JULY 20% promo code and free shipping?

Yes. Code JULY is the sitewide Two Pages promo at 20% off, valid on both Liz Linen Blackout Pleated and Atlanta Room Divider Blackout. The Liz Linen Blackout product page may also display a native catalog code BLACKOUT (22% off), which stacks differently. For editorial consistency we recommend JULY across the cart. Free shipping unlocks above $300 cart value, so both Living and Bedroom Liz configurations and most Atlanta Series A Medium-and-above ship free.

The Verdict

Liz Linen Blackout Pleated wins when the answer involves a window, a pinch pleat aesthetic, and a bedroom or media room. Atlanta Room Divider Blackout wins when the answer involves an open span, a ceiling track, and a studio partition. Same 99% blackout claim, two different product categories engineered for two different jobs. The configurator does the rest. Order the refundable swatch first, hold it in the actual room light at 6am and 6pm, then commit on the production lead time.